1. Home
  2. Knowledge Base
  3. FAQ
  4. Intrathecal Injections and Dosage

Intrathecal Injections and Dosage

Q: Our lab is getting ready to begin a project using one of your targeted toxins. We already did a preliminary experiment to try out the material, but we have a couple of questions before we start the larger project. First, do you have any protocols or references for injecting intrathecally?

A: Thank you for your inquiry. We appreciate the opportunity to get involved in projects before they begin. At Advanced Targeting Systems, we do not do any in vivo work, just in vitro, however we have collaborated with many fine laboratories that have good experience with intrathecal injections. If you search PubMed with the keywords ‘saporin’ and ‘intrathecal’ you will be able to view references that will give you good information on techniques and protocols. Prior to beginning your project you will want to submit your animal care guidelines to your IACUC committee. Turner et al. published an article that will be helpful regarding intrathecal injections. [1]

Q: The second question is in two parts: 1) how do we determine the appropriate dose, and 2) how do we know saporin is not killing indiscriminately at that dose?

A: You should always use a control when determining the appropriate dose. A basic premise of the ATS targeting technology is that if a control (saporin alone or a control conjugate) evokes a response, then the dose is too high. Whenever a new shipment of targeted toxin is received, the proper working dilution should be ascertained before beginning a project. The targeted toxin data sheet states:

“There may be lot-to-lot variation in material; working dilutions must be determined by end user. If this is a new lot, assess the proper working dilution before beginning a full experimental protocol.”

If you search on the ATS website for the species and route of administration you plan to use, you can look through the publication summaries and see the dose that was used for that particular study. That will give you a ballpark range in which to start your dose titration. Just keep in mind: if the control kills cells, the dose is too high.

References

  1. Turner et al. Administration of Substances to Laboratory Animals: Routes of Administration and Factors to Consider. J Am Assoc Lab Anim Sci 50(5): 600–613, 2011.
Shopping Cart
Scroll to Top